Comparison of the mechanical and physical properties of a carbon fibre epoxy composite manufactured by resin transfer moulding using conventional and microwave heating

Microwave processing holds great potential for improving current composite manufacturing techniques, substantially reducing cure cycle times, energy requirements and operational costs. In this paper, microwave heating was incorporated into the resin transfer moulding technique. Through the use of microwave heating, a 50% cure cycle time reduction was achieved. The mechanical and physical properties of the produced carbon fibre/epoxy composites were compared to those manufactured by conventional resin transfer moulding. Mechanical testing showed similar values of flexural moduli and flexural strength for the two types of composites after normalisation of the corresponding data to a common fibre volume fraction. A 9% increase of the interlaminar shear strength (ILSS) was observed for the microwave cured composites. This enhancement in ILSS is attributed to a lowering of resin viscosity in the initial stage of the curing process, which was also confirmed via scanning electron microscopy by means of improved fibre wetting and less fibre pull-out. Furthermore, both types of composites yielded minimal void content

What are communities of practice? A comparative review of four seminal works

This paper is a comparative review of four seminal works on communities of practice. It is argued that the ambiguities of the terms community and practice are a source of the concept's reusability allowing it to be reappropriated for different purposes, academic and practical. However, it is potentially confusing that the works differ so markedly in their conceptualizations of community, learning, power and change, diversity and informality. The three earlier works are underpinned by a common epistemological view, but Lave and Wenger's 1991 short monograph is often read as primarily about the socialization of newcomers into knowledge by a form of apprenticeship, while the focus in Brown and Duguid's article of the same year is, in contrast, on improvising new knowledge in an interstitial group that forms in resistance to management. Wenger's 1998 book treats communities of practice as the informal relations and understandings that develop in mutual engagement on an appropriated joint enterprise, but his focus is the impact on individual identity. The applicability of the concept to the heavily individualized and tightly managed work of the twenty-first century is questionable. The most recent work by Wenger – this time with McDermott and Snyder as coauthors – marks a distinct shift towards a managerialist stance. The proposition that managers should foster informal horizontal groups across organizational boundaries is in fact a fundamental redefinition of the concept. However it does identify a plausible, if limited, knowledge management (KM) tool. This paper discusses different interpretations of the idea of 'co-ordinating' communities of practice as a management ideology of empowerment

Comparison of the mechanical and physical properties of a carbon fibre epoxy composite manufactured by resin transfer moulding using conventional and microwave heating

Microwave processing holds great potential for improving current composite manufacturing techniques, substantially reducing cure cycle times, energy requirements and operational costs. In this paper, microwave heating was incorporated into the resin transfer moulding technique. Through the use of microwave heating, a 50% cure cycle time reduction was achieved. The mechanical and physical properties of the produced carbon fibre/epoxy composites were compared to those manufactured by conventional resin transfer moulding. Mechanical testing showed similar values of flexural moduli and flexural strength for the two types of composites after normalisation of the corresponding data to a common fibre volume fraction. A 9% increase of the interlaminar shear strength (ILSS) was observed for the microwave cured composites. This enhancement in ILSS is attributed to a lowering of resin viscosity in the initial stage of the curing process, which was also confirmed via scanning electron microscopy by means of improved fibre wetting and less fibre pull-out. Furthermore, both types of composites yielded minimal void content

The impact of tinnitus distress on cognition

Tinnitus is the chronic perception of a phantom sound with different levels of related distress. Past research has elucidated interactions of tinnitus distress with audiological, affective and further clinical variables. The influence of tinnitus distress on cognition is underinvestigated. Our study aims at investigating specific influences of tinnitus distress and further associated predictors on cognition in a cohort of n = 146 out-ward clinical tinnitus patients. Age, educational level, hearing loss, Tinnitus Questionnaire (TQ) score, tinnitus duration, speech in noise (SIN), stress, anxiety and depression, and psychological well-being were included as predictors of a machine learning regression approach (elastic net) in three models with scores of a multiple choice vocabulary test (MWT-B), or two trail-making tests (TMT-A and TMT-B), as dependent variables. TQ scores predicted lower MWT-B scores and higher TMT-B test completion time. Stress, emotional, and psychological variables were not found to be relevant predictors in all models with the exception of small positive influences of SIN and depression on TMT-B. Effect sizes were small to medium for all models and predictors. Results are indicative of specific influence of tinnitus distress on cognitive performance, especially on general or crystallized intelligence and executive functions. More research is needed at the delicate intersection of tinnitus distress and cognitive skills needed in daily functioning

Links between HPA axis and adipokines: clinical implications in paradigms of stress-related disorders

Introduction: In the human organism, a constant interplay exists between the stress system [which includes the activity of the hypothalamic-pituitary-adrenal (HPA) axis] and the adipose tissue. This interplay is mediated by hormones of the HPA axis such as corticotropin-releasing hormone (CRH), adrenocorticotropic hormone (ACTH) and glucocorticoids (GCs) and adipokines secreted by the adipose tissue. Areas covered: In this critical review, the bi-directional interactions between HPA axis and the most studied adipokines such as leptin and adiponectin, as well as the pro-inflammatory adipocytokines tumor necrosis factor (TNF) and interleukin (IL) 6 are presented. Furthermore, these interactions are described in normalcy as well as in specific clinical paradigms of stress-related disorders such as eating disorders, hypothalamic amenorrhea, and stress-related endogenous hypercortisolism states. Wherever new therapeutic strategies emerge, they are presented accordingly. Expert commentary: Additional research is needed to clarify the mechanisms involved in the interplay between the HPA axis and the adipose tissue. Research should be focused, in particular, on the development of new therapeutic means targeting dysfunctional adipose tissue in stress-related situations. © 2018, © 2018 Informa UK Limited, trading as Taylor & Francis Group